Designed to complement the 547600 solvent repurifier and to facilitate product removal from the storage area. This adapter will provide clearance from the boiling flask and attaches to a 213210 solvent storage flask. Hose connection allows access to vacuum source or inert gas.
(2) Gas inlet type with inner joint. Supplied with an 801001 glass plug and the patented 809000 pressure/vacuum retainer. Used with sleeved stopper 774260 or 882311.
(2) Gas inlet type with an outer joint. Supplied with an 801001 glass plug and the patented 809000 pressure/vacuum retainer. Used with sleeved stopper 774260 or 882311.
(2) Gas balloon type for protective storage in jointed vessels. One arm of the T-bore stopcock is connected to the inert gas source. The arm with a hose connector is connected to a balloon. Vessels connected to this adapter may be flushed and filled with inert gas. The balloon can be expanded with inert gas for storage at the same time or separately. The stopcock bore is then rotated to connect the balloon to the vessel. The inert gas tubing may be disconnected giving the vessel its own portable inert gas source to balance volume changes caused by sample removal. Supplied without the balloon. Replacement plug is 802001 and the retainer is 809000.
(2) Gas inlet adapter with a joint. Sidearm has a 2 mm bore 821001 PTFE stopcock with a port for gas introduction and a rubber-stoppered port for syringe retrieval. Supplied complete with one 882311 septum stopper.
Designed for applications that require evacuated apparatus to be filled with an inert gas to one atmosphere. Uses include the introduction of an inert gas into a vacuum desiccator or nitrogen into Airless-ware® apparatus. A pressure release valve should be placed between the nitrogen source and nitrogen manifold on all Airless-ware manifold installations.
Operation: Three mL of paraffin or silicone oil is added to the bubbler. One arm is connected to the low-pressure gas source, the other to the manifold or Airless-ware equipment. The check valve prevents oil or air from surging into the apparatus.
(8) Improved version of classic Schlenk tube. The modified Kjeldahl shape facilitates heating, stirring and solvent stripping without impairing ease of liquid and solid transfer. Bottom of the flask is shaped to fit spherical heating mantles. Supplied with an 801001-0002 glass plug and the patented 809000-0021 pressure/vacuum retainer.
(3) Round bottom flask with a joint and an additional angled side neck with the same size joint as the center neck. A 2 mm bore glass stopcock is used for short-term storage of solvents and reactions of air-sensitive materials. Supplied with an 801001-0002 glass plug and the patented 809000-0021 pressure/vacuum retainer.
(2) Round bottom type developed by Kontes for solvent storage as required by many inorganic reactions. Dry, deoxygenated, and grease-free solvents are maintained in this state for relatively long periods of time. Solvent integrity is provided by the Kontes HI-VAC® valve which provides access to the flask contents. Quantities of solvent are withdrawn from the flask using either a cannula or a syringe with a proper length needle. Valve is 0-4 mm, with an 826601 plug.
With sidearm stopcock and joints. Kontes HI-VAC® valve minimizes contamination and maintains vacuum in the micron region. Tip seal of the valve is directed toward the normal storage area of the funnel.
(5) Tube has a HI-VAC valve to control gas flow to the reaction tube. Suitable for use with 216050 or 216060 manifolds. Tubes are constructed of medium wall borosilicate glass and perform well under both thermal and pressure-type reactions. The 25 and 50 mL tubes have 0-4 mm valves with 826601-0004 plugs. The 100 and 350 mL tubes have 0-8 mm valves with 826601-0008 plugs.
Modified version of the Schlenk Tube having a size 15 standard socket joint at the sidearm. Suitable for connection to 216030 or 216040 vacuum manifolds. The 25 and 50 mL tubes have 0-4 mm valves with 826601-0004 plugs. The 100 and 350 mL tubes have 0-8 mm valves with 826601-0008 plugs. All sizes have #116 o-ring.
(8) Improved version of Schlenk tube. The modified Kjeldahl shape facilitates heating, stirring and solvent stripping without impairing ease of liquid and solid transfer. Bottom of the flask is shaped to fit Kontes spherical heating mantles. Supplied with an 801001-0002 glass plug and the patented 809000-0021 pressure/vacuum retainer.
Designed for applications that require evacuated apparatus to be filled with an inert gas to one atmosphere. Uses include the introduction of an inert gas into a vacuum desiccator or nitrogen into Airless-ware® apparatus. A pressure release valve should be placed between the nitrogen source and nitrogen manifold on all Airless-ware manifold installations.
Operation: Three mL of paraffin or silicone oil is added to the bubbler. One arm is connected to the low-pressure gas source, the other to the manifold or Airless-ware equipment. The check valve prevents oil or air from surging into the apparatus.
outer joint; others are 
